1000 hp over the top 2015 Z06 over 200k invested must read description.

Great Opportunity to purchase 2015 Z06 / Z07 Corvette with low 15000 mileage and 1200HP capability
We have invested well over $200k in to this project and have outstanding car that you can drive any time / any place with AC and comfort.
Great effort, time, and care went in to this car and it shows. We have virtually all documentation with all the receipts for parts and labor.
This is a brand new build with is ready for track or street !!

2015 Z06-Z07 1075 WHP with 15,000 miles !!
This track inspired car is street legal with plates and AC. The motor was built by World Famous Late Model Engines (LME) Huston. TX. The Secondary Fl and tuning is by Prospeed Autosports . Huston, TX. This car can make 1200HP on the motor and 1075RRWHP on 112 race fuel and 750+RWHP on pump gas.
Current Set up is 1000HP / 870 WHP on Sunoco 112 and 850 HP / 750 WHP on 93 Octane.

Motor:
LME built 390 Cub Stoker LME Motor with all the best parts money can buy.
Factory Brand New LT1 GM Block.
Calais Magnum Series LT1 C7 Crank 4340 3.750 Stroke.
Calais Ultra Billet 6.125 Rods with ARP Ultra 7/16 Rod bolts (good for 1400 WHP)
Custom Dimond Pistons w/Internal Milling. Lateral Gas Ports. Double Pin Oilers.:
Valve pocket Depth. Top Ring, Second Ring Lands Optimized for Max Durability in FI Applications.
Trend Upgraded H-13 .927 Toll Steel Wrist Pins .200 Wall Thickness.
Cam Motion Custom ProCharger / Roade Race Hydraulic Roller Billet Cam
222/238 640/630 7500 RPM Red Line.
LME 5 Peace Custom Billet intake.
ATI 216163 Custom Balancer.

Ignition:
HGK-6510 Iridium Spark Plugs.
Magnecor KV85 8.5mm Custom Spark Plug Wire Set.
Design Engineering Custom Titanium Heat Shield Boot Protectors.

Induction:
C7 LT4 F1 Race ProCharger Kit (1400HP)
Custom 4.00” Race Intake with 4.00” K&N Air Cleaner.

Fuel system:
ProSpeed 1300 injectors
ProSpeed fuel controller
ProSpeed port injection package
ProSpeed Secondary Standalone FI with boost controller
Bosch Hi-Flow Secondary Fuel pump

Colling:
HR Race Radiator
ProSpeed Billet thermostat housing
ProSpeed Custom Spaul twin fan/shroud
Distil Water with Water Wetter.

Lubrication:
ProSpeed Oil Cath-can
ProSpeed custom twin oil coolers set up with steel braded lines and AF fitting

Exhaust:
American Racing Headers (Mid Link) $
Whole header / exhaust system was coated by Jet-Hot with 2200 degree custom coating with reduces temps by 50%

Clutch:
Mantic Triple Ceramic Disk
Complete Kit

Suspension;
AFE Control PFADT Series Sway Bars Set
GM Suspension / Magnetic ride update

Brakes:
Essex / AP Racing Radi-CAL Competition Brake Kit.
Front only 9668/390mm
Ferodo 39mm Racing Brake pads.
Custom SS Steel Breaded Brake Caliper Brake Lines
Factory Ceramic Rear / Brambo Brakes

Safety:
Corvette C7 Harness Shark Bar
TeamTech CamLock 5 Point 2” Racing Harness . Driver and Passenger

Paint Protection.
Car is covered with custom EXPEL 3M Clear film, with custom yellow headlight film.

Custom Aluminum Rear Diffuser by Diffuze.

Factory Silver Wheels with Excellent Condition Michelin Pilot Super Sport
Front P285/30ZR19 Rear P335/25ZR20.

ARP Longer Wheel Studs with Gorilla racing open end wheel nuts.

Engen was completely blueprinted and Dyno by LME. 08-01-19
Blueprinting included:
All New
Dimond Pistons.
Ring and Barings
Oil Pump
Complete labor

Dyno 657HP without the ProCharger.
Prospeed with have finished motor install with new tuning and Dyno
1000HP @ The Crank on 112 875 RWHP
850HP @ The Crank on 93 750 RWHP

Car is Turn Key and ready to go.
Comes with HP Tuner
Laptop with tunes
Several Stock parts and aero effects componence.
$85000
Predator Custom 24 foot aluminum lightweight trailer available at additional $5000
Cost $7500

Addition Parts
With the Sale is included:
Complete Factory C7 Stage 3 Performance Aero Body Kit

Factory Carbon Ceramic Rotors and Brambo Brake Calipers.
All the brakes and mounting headwear, Factory brake pads.
Additional Ferodo 39mm Racing Brake pads.
Additional SS Steel Breaded Brake Caliper Brake Lines
Factory Sway-Bars
Factory Clutch and Fly Wheel
Factory Cold Air Intake.
Custom Track Tool Box.
Ther is Boxes and Boxes of parts and additional supply's
Complete Documentation and receipts.